Product ID:A834 BRAZING ALLOY-SILVALOY 50
MSDS Date:07/01/1986
FSC:3439
NIIN:00F055610
MSDS Number: CGJMD

ALLIED SUPPLY CORPORATION

530 S HWY H
ELKHORN, WI 53121-5000
US

Emergency Phone: 414-723-5455/213-261-2193

Info Phone: 414-723-5455/213-261-2193

Cage: 0F6U6

ALLIED SUPPLY CORP

288 ELKHORN, WI 53121 US

Telephone: 414-723-5455

Cage: 0F6U6

SILVER *97-4*

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 50%

OSHA PEL 0.01 MG/CUM

ACGIH TLV: 0.1 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (DUST & MIST), BRONZE POWDER *97-4*

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 15.5%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC *97-4*

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 16.5%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CADMIUM (HUMAN CARCINOGEN BY IARC GROUP 1 & OSHA, SUSPECTED

CAS: 7440-43-9

RTECS: EU9800000

Fraction By Weight: 18%

OSHA PEL 0.005 MG/CUM

ACGIH TLV: 0.01 MG/CUM

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF THE
RESPIRATORY TRACT & LUNG TISSUE, CAUSING PULMONARY EDEMA,
BRONCHITIS, PNEUMONITIS. EXPOSURE CAN PRODUCE KIDNEY DAMAGE,
EMPHYSEMA & BE FATAL.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, INFLAMMATION, VOMITING, DIARRHEA,
HEADACHE, DIZZINESS, FEVER, CHEST PAINS, BREATHLESSNESS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE &/SUPPORT BREATHING
AS NEEDED. HAVE TRAINED PERSON GIVE OXYGEN. KEEP WARM & AT REST.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:USE EXTINGUISHER WHICH ARE APPROPRIATE FOR THE
SURROUNDING FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NON-FLAMMABLE. TOXIC FUMES & VAPORS CAN
BE EMITTED FROM THIS METAL ALLOY IF HEATED TO MOLTEN CONDITION IN A
FIRE SITUATION.

Spill Release Procedures:FOR USE, RECLAIM/SCRAP.

Handling and Storage Precautions:STORE CAREFULLY IN A CLEAN, DRY PLACE.
KEEP AWAY FROM OXIDIZING AGENTS.

Respiratory Protection:IN CONFINED AREAS, USE APPROVED AIR
SUPPLIED/SCBA EQUIPMENT.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL) W/FILTER. MAINTAIN AIR
FLOW OF 100 LFM IN BRAZING ZONE.
Protective Gloves:NOT RECOMMENDED
Eye Protection:GLASSES RECOMMENDED
Other Protective Equipment:NONFLAMMABLE PROTECTIVE CLOTHING.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:1200F
Vapor Pres:<0.1
Spec Gravity:4.5-5
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC WIRE, ROD/STRIP; ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:VAPORIZATION.
Hazardous Decomposition Products:CADMIUM/ZINC VAPORS.
Conditions to Avoid Polymerization:AVOID OVERHEATING WHILE BRAZING TO
MINIMIZE CADMIUM/ZINC.

Waste Disposal Methods:DISPOSE OF THROUGH A LICENSED WASTE DISPOSAL
COMPANY, IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.